Send inquiry
Zoom
Name: JT6323A(600W/500V/60A)
Name: Nanjing Jartul Electronics Co., Ltd
Model: JT6323A
Brief:
600W/60A/500V electronic load; 25uS full range current rising time; 500KHz synchronized sampling; taking great advantage in testing switching power supply, LED power supply, ATE, fuse, etc.
Details
Front& Back Panel Features Technical Data Monitoring Software
Application: 1. Switch power supply 2. LED Power Supply 3. ATE Systems 4.Battery 5.Charger
FEATURES:
Modes & protection
CC, CV, CP, CR, DYNA, List, Sweep, OCP modes.
LED mode, real simulating LED loading.
Over current, over voltage, over power, over temperature, polarity reversed protection.
Automatic test alone
Press one button to complete load effect, ripple, dynamic, OCP and Short circuit test.
Show complete test report and support step test.
Multi load synchronous control
Support up to 16 loads Sync. loading & dynamic test, fit for testing multi-output power supply.
Support up to 16 loads parallel mode for high power.
High rising speed (The full range current rising time is 10us)
High speed & accuracy
With 0.03% accuracy and 500kHz frequency, the current slew rate can be programmed.
500kHz sync. sampling frequency with 15Hz data update rate, 0.03% accuracy, 10uA &100uV resolution.
Real-time measurement of Vpp/Vp+/Vp-/Ipp/Ip+/Ip-
Dynamic test and control
Up to 50kHz dynamic loading frequency & real-time measurement of peak voltage (Vp+/Vp-).
Support sync. control and sync. dynamic loading of multi loads.
Support frequency sweep up to 50kHz.
List function
8 List files, each file with 200 steps and 2us resolution.
Support up to 50kHz complex waveform editing.
Each step current slew rate can be programmed.
Automatic OCP Testing & Pmax Measurement
Automatically test OCP.
Capture automatically Pmax & the voltage and current when working at the Pmax point.
Trigger and timing measurement
Support voltage/current waveform trigger and timing measurement.
Support external trigger for the power supply startup time / hold time measurement.
Support waveform capture and test for OVP protection point and protection time.
Application of program controlling
SCPI Protocol, isolated RS232 serial port.
5V/200mA power output, fit for the interconnection of equipments with different interfaces.
TRIG_IN、RI、DFI、TRIG_OUT four high-speed isolated I/O, supporting multi loads sync.control.
Precision high speed digitizing measurement/ data capture(500kHz / 16 bits / 4096 points).
TECHNICAL DATA
Model
JT6323A
Input Rating
Power
600W
Voltage
0~50
0~500V
Current
0~6A
0~60A
Min. operating voltage
2.8V@60A
Full range current rising time
25uS
CC Mode
Range
0~6A
0~60A
Resolution
0.1mA
1mA
Accuracy
0.03%+0.05%FS
CV Mode
Range
0~50V
0~500V
Resolution
0.5mV
5mV
Accuracy
0.03%+0.02%FS
CP Mode
Range
600W
Resolution
16Bits
Accuracy
0.1%+0.1%FS
CR Mode
Range
0.047Ω~25KΩ
Resolution
16Bits
Accuracy
0.1%+0.0002R
LED Mode
Bandwidth
100kHz above
Rd Coefficient Range
0.001~1
Dynamic Operation Mode
Range
10uS~50S
Resolution
2uS
Accuracy
1uS+20PPM
Slew rate
1.2A/mS~6A/uS
Voltage Meas.
Range
0~50V
0~500V
Resolution
0.1mV
1mV
Accuracy
0.03%+0.02%FS
Current Meas.
Range
0~6A
0~60A
Resolution
0.01mA
0.1mA
Accuracy
0.03%+0.05%FS
Ripple Meas.
Range
0~50V
0~500V
Bandwidth
15Hz~250kHz
Accuracy
0.03%+3mV
0.03%+30mV