CNC flame Cutting Machine |
1.Smart design. |
2.Electric height adjustment. |
3.High precision. |
4.Prompt shippment. |
CNC flame Cutting Machine: |
This type of cutting machine for small cantilever structure, horizontal cutting width 1.4m, vertical cutting length 1.5m, 2m, 2.5m, 3m, 3.5m and other specifications, is between LHBX-1 Portable CNC cutting machine and LHXB -2 Cantilever CNC Cutting Machine cutting machine between the two kind of models, both LHBX-1 type and LHXB-2-type cutting machine merit, can be placed directly into the plate, but also can be placed on the side of the plate cutting. Â |
 |
The CNC cutting machine for the cantilever structure, horizontal cutting width 2m, each section longitudinal rails 3m (can be infinitely extended); can configure multiple cutting torch, the user can type matching capacitor or automatic arc voltage increase; cut Actions at the top with fine-tuning of the digital control panel, operation is extremely convenient; LHXB-2 CNC cutting machine for the small overall mobile, not fixed occupancy plant, easy to use and flexible. |
Parameters: |
Cross Beam Length |
1m |
Longitudinal Rail Length |
2.0m |
Effective Cutting Width (X axis) |
1m |
Effective Cutting Length (Y axis) |
1.5m |
Cutting Mode |
Flame only; Plasma only |
Drive Mode |
Single-side |
Drive Method |
Rack and pinion drive for X and Y axes |
Flame Cutting Thickness |
5-200mm |
Plasma Cutting Thickness |
1-60mm (according to the specification of plasma power source) |
Cutting Speed |
0-3500mm per minute |
Moving Precision |
0.01mm per step |
Power Source |
220V 50Hz  500-1000W |
Cutting Gas |
Acetylene, Propane |
Plasma Gas |
Pressed air, Oxygen, N2 |
Torch Height Controller |
Electromotion bottom |